Samsung Galaxy S24 Ultra (SM-S928B) UFS Dump File | S928BXXS6DZG1
Device Specifications & Firmware Details:
Device Model: Samsung Galaxy S24 Ultra (SM-S928B)
Processor / Platform: Qualcomm Snapdragon 8 Gen 3 (SM8650)
Storage Interface: UFS 4.0
Firmware Build Number: S928BXXS6DZG1
Binary Level: Binary 6 / BIT 6 (SW Level 6)
File Status: Read from a 100% working unit, fully tested & verified
Overview & File Description
This package contains the full raw UFS dump file read directly from a fully functional Samsung Galaxy S24 Ultra (SM-S928B). It includes all essential boot configurations and LUN partition structures required to restore corrupted or blank storage chips back to factory state.
Included Partitions:
Full LUN layout: LUN0, LUN1, LUN2, LUN3, LUN4, LUN5
Device configuration descriptors & bootloader partitions
Compatible Programmers:
EasyJTAG Plus / EasyJTAG UFS Socket
Medusa Pro II
MiPi Tester Box
UFI-UFS ToolBox / JC Programmer
When to Use This File:
Dead Boot Repair: Fix devices stuck in EDL mode (9008), draw zero/low current, or show no sign of life.
Hard Brick Recovery: Recover devices damaged by corrupted partition tables, failed updates, or wrong firmware flashing.
Storage Chip Replacement: Rebuild the master partition table after replacing or reballing the UFS 4.0 IC.
Important Warning:
Always back up the existing security, EFS, and NV partitions from the board (if readable) prior to writing this dump to prevent loss of the device's original IMEI, Baseband, and Calibration data.
PAİD SUPPORT:
Device Specifications & Firmware Details:
Device Model: Samsung Galaxy S24 Ultra (SM-S928B)
Processor / Platform: Qualcomm Snapdragon 8 Gen 3 (SM8650)
Storage Interface: UFS 4.0
Firmware Build Number: S928BXXS6DZG1
Binary Level: Binary 6 / BIT 6 (SW Level 6)
File Status: Read from a 100% working unit, fully tested & verified
Overview & File Description
This package contains the full raw UFS dump file read directly from a fully functional Samsung Galaxy S24 Ultra (SM-S928B). It includes all essential boot configurations and LUN partition structures required to restore corrupted or blank storage chips back to factory state.
Included Partitions:
Full LUN layout: LUN0, LUN1, LUN2, LUN3, LUN4, LUN5
Device configuration descriptors & bootloader partitions
Compatible Programmers:
EasyJTAG Plus / EasyJTAG UFS Socket
Medusa Pro II
MiPi Tester Box
UFI-UFS ToolBox / JC Programmer
When to Use This File:
Dead Boot Repair: Fix devices stuck in EDL mode (9008), draw zero/low current, or show no sign of life.
Hard Brick Recovery: Recover devices damaged by corrupted partition tables, failed updates, or wrong firmware flashing.
Storage Chip Replacement: Rebuild the master partition table after replacing or reballing the UFS 4.0 IC.
Important Warning:
Always back up the existing security, EFS, and NV partitions from the board (if readable) prior to writing this dump to prevent loss of the device's original IMEI, Baseband, and Calibration data.
PAİD SUPPORT:
Last edited:
