Dump Honor 400 Series (DNP-N09) Dump File | Dead Boot Repair / Unbrick

[Mpyunlock]

Device Specifications & Firmware Details:

• Device Model: Honor 400 Series / Honor Variant (DNP-N09 / DNP-AN00)
• Chipset / Platform: MediaTek Dimensity / Qualcomm Platform
• Storage Interface: UFS / eMMC
• Operating System: MagicOS (Android 15 / Android 16)
• File Status: 100% Tested & Verified on Working Board

Overview & File Description​

This package provides a complete raw storage dump and bootloader partition backup extracted from a fully functional Honor DNP-N09 device. It is intended for reviving hard-bricked units, restoring damaged bootloader sectors, or flashing newly installed storage ICs via direct hardware programmer tools.

Included Partitions & Contents:

• Full Storage Dump: LUN0, LUN1, LUN2 / Userarea, Boot1, Boot2
• Core boot binaries: preloader / xbl, lk / abl, boot, dtbo, tee, vbmeta, etc.
• Factory GPT partition layout & flashing descriptors (scatter / rawprogram0.xml)

Compatible Hardware Programmer Tools:

• EasyJTAG Plus (Socket / ISP Mode)
• Medusa Pro II
• MiPi Tester Box
• UFI Box / UFI-UFS ToolBox

Key Applications & Use Cases:​

1. Dead Boot Repair: Recover devices drawing low standby current, stuck in low-level USB download modes (BROM / EDL 9008), or showing no screen/vibration.
2. Hard Brick Fix: Repair partition table corruptions caused by failed OTA updates, flashing wrong firmware, or interrupted writing processes.
3. Storage IC Replacement: Program directly to fresh memory chips after hardware replacement, reballing, or repartitioning.

Important Warning:

Before erasing the chip or flashing the full dump, always dump and back up the unique network and calibration partitions (nvram/nvdata or modemst1/modemst2/persist) to safeguard the original IMEI, Baseband calibrations, and factory serial numbers.

]PAİD SUPPORT

This link is hidden. To view it, please... log in veya sign up.