Dump Honor 200 Lite / Honor 400 Series (DNY-NX9) Dump File | Dead Boot Repair / Unbrick

[Mpyunlock]

Device Specifications & Firmware Details:

• Device Model: Honor 200 Lite / Honor 400 Series (DNY-NX9 / DNY-LX1 / DNY-LX2)
• Chipset / Platform: MediaTek Dimensity 6080 (MT6833P / MT6833, 6nm)
• Storage Interface: UFS / eMMC (Partition Table GPT / Scatter)
• Operating System: MagicOS (Android 14 / Android 15)
• File Status: 100% Tested & Verified on Working Board

Overview & File Description​

This package contains the full raw storage dump and bootloader partition backup read from a working Honor DNY-NX9 device powered by MediaTek Dimensity 6080. It is designed to revive hard-bricked units, restore corrupted preloader/boot stages, or initialize a replacement memory IC.

Included Partitions & Contents:

• Full Storage Dump: BOOT1, BOOT2, RPMB, and USERAREA (or LUN0, LUN1, LUN2)
• Critical boot binaries: preloader, lk, boot, dtbo, tee, vbmeta, etc.
• Android MT6833 scatter file and factory GPT partition layout

Compatible Programmer Boxes & Hardware Tools:

• EasyJTAG Plus (Socket / ISP)
• Medusa Pro II
• MiPi Tester Box
• UFI Box / UFI-UFS ToolBox

Key Applications & Use Cases:​

1. Dead Boot Repair: Fix devices stuck in MediaTek BootROM (BROM / MTK USB Port), bootlooping without recovery, or drawing low current on power supply.
2. Hard Brick Recovery: Restore partition structures corrupted by bad OTA updates, cross-flashing, or destroyed preloader partitions.
3. Memory IC Replacement: Flash directly onto blank storage chips after memory replacement, repartitioning, or reballing.

Important Warning:

Always back up the device's original security and calibration partitions (nvram, nvdata, nvcfg, protect_f, protect_s, proinfo) prior to flashing to preserve the original IMEI, Baseband calibrations, and factory serial numbers.

PAİD SUPPORT:

This link is hidden. To view it, please... log in veya sign up.